3850 MRI IV Pump System – End of Life Support (EOLS)

Production of this system ceased on 7th May 2014 and it entered its EOLS period. EOLS will cease on May 6th 2019. Should you have any questions regarding this or wish to discuss replacing or upgrading your existing system/s please contact MRI-Devices.

The Non Magnetic Linear Peristaltic 3850 Infusion Pump has been designed from the ‘ground up’ for use in the MR Environment. The unit is approved for use in 0.2 to 3.0 T Magnets and is completely operational up to the 10,000 Gauss Line.

Features include:

  • Dose Rate Calculator
  • Bolus Dose Programming
  • Secondary Drug Delivery
  • Syringe Delivery
  • Adjustable Occlusion Pressure, KVO and ALARM Settings
  • CQI Data Ability w/Tracking Software which records up to 5000 Entries
  • Integrated Set and Pump based Free Flow Protection
  • Flow Rates from 1 – 999ml’s per hour
  • Large Programming Screen
  • 12 Hour Battery Life
  • Expansion to second pump channel with optional ‘Side Car’ Module
  • Ability to charge while plugged in during scans
  • Easy to use Bypass Infusion Set for quick change over from Hospital Infusion Pumps without breaking down or disconnecting the IV Lines.
  • Weight 3.65 kg.
3850_1 3850 3850

Pole

Fully Non magnetic weighted IV stand designed for use in the MR. Easily supports two Model 3850 MRidium MRI Smart Infusion Pumps. The Pole is 66″ high with a wide pole radius, 5 locking casters designed to roll easily during transport. Pole has four Aluminum hooks for holding fluids. Maximum recommended load is 20 kg.

(IRadimed P/N 1119)

Pole 3850 & 3860

Syringe Set

The MRidium Syringe Delivery set uses a unique vented syringe adapter which allows for delivery of IV Fluids from syringes in the MR Environment while on the 3850 MRidium MRI Smart Infusion Pump.

This set is ideal for Paediatrics, Anaesthesia, and other modalities which call for small dose delivery through a syringe. The set uses Microbore Tubing along with integrated set and pump based free flow protection for maximum safety.

The Syringe Set Priming volume is only 4mL, with an Overall length of 216cm (85″).

(P/N: IVP1057 / Case of 50 P/N: 1057-50)

Syringe Set 3850 & 3860

Primary Set

The Primary Standard IV Set is designed for starting a new IV line in the MR. The set is 118″ long, latex free, DEHP free, PVC tubing with a universal bag spike. It utilises two Needle Free Luer Locking Valve Sites designed for secondary and IV Push Delivery.

Approximate priming volume is 18 ml. The set has built in integrated anti-free flow protection which can be used either as a gravity set or pump based set.

It comes packaged in cases of 50 each.
(P/N: IVP1056 / Case of 50 P/N: 1056-50)

Primary Set

Bypass Set

The MRidium Bypass infusion set is a uniquely designed infusion set which allows hospitals to easily switch over hospital pump based IV sets to the MRidium Pump without having to tear down lines or disconnect from the patient. This allows for quick transfer of patients and may reduce the risk of infection from the disconnection of lines.

The set is 60″ long; latex free, DEHP free, PVC tubing with can be used in a number of configurations. The set has two Needle Free Luer Locking Valve Sites designed for secondary and IV Push Delivery. The set includes both a roller clamp and slide clamp. Approximate priming volume is 10 ml. The set has built in integrated anti-free flow protection which can be used either as a gravity set or pump based set.

It comes packaged in cases of 50 each.
(P/N: IVP1055 / Case of 50 P/N: 1055-50)

Bypass Set

 

Back to Top